![Mahli MDB-90 Instruction Manual Download Page 3](http://html1.mh-extra.com/html/mahli/mdb-90/mdb-90_instruction-manual_3662604003.webp)
Caution
• CAUTION: Lamp becomes hot to touch.
Do NOT move the warmer, or touch the wax
warmer or wax while the wax is melted. Power OFF and allow the wax warmer and wax
to cool down completely before handling the wax warmer.
Failure to follow these
instructions can result in burn or injury.
• Do not use appliance for other than intended use.
• Do not operate unattended.
• Do NOT put fingers or hands into the product.
• Keep out of reach of children and pets. Children should not be left unsupervised near
this product. This unit is not to be used by children or any person(s) with reduced
physical, sensory, or mental capabilities, or lack of experience and knowledge unless
they have been given express supervision and instruction.
• Never add water to wax.
• Some wax may overflow while melting. Watch carefully.
Additional Precautions and Warnings
• Always turn off and unplug when not in use or before maintenance.
• Keep away from direct sunlight, heat sources, air conditioners, and fans.
• Always keep on a stable, flat surface. Do NOT place on a carpet, bed, cushion or other
non-flat, non-stable surface.
• Keep away from electronic equipment.
• Never move the product while in use.
• Surface temperature is hot. Do not allow hot wax warmer to come into contact with
skin.
• Keep the power cable clear of pathways, and do not forcefully pull or remove from the
unit.
• To disconnect, grip plug and pull from wall outlet. Never pull on cord to disconnect.
• If smoke or burning smell is detected, immediately unplug the unit.
• It is recommended, if the product will not be in use for a long period of time, that the
wax warmer be covered to protect it from exposure to dust.
• The amount and intensity of aroma produced will vary. Factors that affect production
of aroma can include humidity, temperature, and/or air current. Do not use outdoors.
NORTH AMERICAN MODELS WITH POLARIZED PLUGS:
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to
fit into a polarized outlet only one way. If the plug does not fit
fully into the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not attempt to modify the plug in any
way. If the plug fits loosely into the AC outlet or if the AC outlet
feels warm, do not use that outlet.