MAHLE MCX-1, Operation Manual

Page: 6 / 21

Page 5
OF
F
& O
VE
RF
LO
W
LO
W
ER
RA
DIA
TO
R
OF
F
EX
CH
AN
GE
CO
OL
AN
T O
R
FIL
L R
AD
IAT
OR
& O
VE
RF
LO
W
& O
VE
RF
LO
W
LO
W
ER
RA
DIA
TO
R
EM
PTY
W
AS
TE
TA
NK
EX
CH
AN
GE
CO
OL
AN
T
& O
VE
RFL
OW
FIL
L R
AD
IAT
OR
OF
F
EM
PTY
W
AS
TE
TA
NK
CONNECTION TO POWER
The MCX-1 control panel is illustrated above. Note that the bottom of all three selector
switches has been pressed which turns all functions off. Make sure all switches are off
Make sure all switches are off Make sure all switches are off
Make sure all switches are off
before connecting the battery cable clips to the battery of the vehicle. before connecting the battery cable clips to the battery of the vehicle. before connecting the battery cable clips to the battery of the vehicle. before connecting the battery cable clips to the battery of the vehicle.
WARNING:
WARNING: WARNING:
WARNING: Handle battery connection cable with extreme caution. Batteries generate
Handle battery connection cable with extreme caution. Batteries generate Handle battery connection cable with extreme caution. Batteries generate
Handle battery connection cable with extreme caution. Batteries generate
explosive gases during normal operation. Working in the vicinity of
explosive gases during normal operation. Working in the vicinity of explosive gases during normal operation. Working in the vicinity of explosive gases during normal operation. Working in the vicinity of a a a a
lead lead lead lead----acid or other automotive battery is dangerous. Wear eye protection. acid or other automotive battery is dangerous. Wear eye protection. acid or other automotive battery is dangerous. Wear eye protection. acid or other automotive battery is dangerous. Wear eye protection.
Never smoke or allow a spark or flame in the vicinity of the battery. Do not
Never smoke or allow a spark or flame in the vicinity of the battery. Do not Never smoke or allow a spark or flame in the vicinity of the battery. Do not
Never smoke or allow a spark or flame in the vicinity of the battery. Do not
connect the black power clip to the negative post of the battery to avoid a
connect the black power clip to the negative post of the battery to avoid a connect the black power clip to the negative post of the battery to avoid a connect the black power clip to the negative post of the battery to avoid a
spark.
spark. spark. spark.
1. Verify that all switches are in the off position.
2. Connect the red power clip to the
A
+
@
(positive) post of the vehicle battery. The battery
must be 12 volt.
3.
Connect black power clip to an engine ground (not the negative post of the battery)....