![background image](http://html1.mh-extra.com/html/mahle/fluidpro-atx-3-plus-boost/fluidpro-atx-3-plus-boost_operation-manual_3679434007.webp)
Page 6
COOLER MODE: CONNECTING TO THE
TRANSMISSION SYSTEM
1. Add desired amount of transmission fluid to the new fluid tank through the ATX-3 PLUS BOOST fill port.
Monitor fluid level in the ATX-3 PLUS BOOST with the LED readouts or with fluid sight indicators. Do not
pour more than 25 liters of new transmission fluid to the new fluid tank
.
2.
Locate and disconnect the transmission cooler lines at the most convenient location:
A.
At cooler line connecting to radiator usually most accessible if vehicle is not on lift.
B.
At clamped rubber hose connection to transmission cooler usually most accessible if vehicle is on
a lift. Cooler is most often in front of the radiator.
C.
At cooler line connecting to the transmission usually requires vehicle to be on a lift.
90° Adapter Hose
12 inch
Straight Adapter Hose
Transmission
Fitting
Radiator
12 inch
Adapters
Cooler Lines
5
6
0
-8
0
4
1
4
-0
0
IMPORTANT
Check transmission fluid level according to manufacturer’s
instructions before connecting the ATX-3 PLUS BOOST.
Adjust fluid level if required
Summary of Contents for FluidPRO ATX-3 PLUS BOOST
Page 19: ...Page 18 FLOW DIAGRAM ...
Page 20: ...Page 19 WIRING DIAGRAM ...
Page 22: ...Page 21 NOTES ...
Page 23: ...Page 22 NOTES ...