Mahindra THAR 2009, Owner'S Manual

Page: 31 / 53

Wheel Locking Hubs (Only for 4WD vehicles) Wheel Locking Hubs (Only for 4WD vehicles)
Wheel Locking Hubs (Only for 4WD vehicles) Wheel Locking Hubs (Only for 4WD vehicles) Wheel Locking Hubs (Only for 4WD vehicles)
Automatic Locking Hubs
Automatic Locking Hubs
Automatic Locking Hubs Automatic Locking Hubs Automatic Locking Hubs
Note : Note :
Note : Note : Note :
When you shift to 4WD mode, an auidible ‘Click’ will indicate that
automatic locking hubs are engaged and therefore power is being
transmitted to the front wheels. While changing back to the 2WD
mode. the hubs need to be released.
To Release the locking hubs To Release the locking hubs
To Release the locking hubs To Release the locking hubs To Release the locking hubs
Shift from 4WD to 2WD
Reverse the vehicle in a stright line for about a meter
An auidble ‘Click’ will indicate that the hubs have been released
Unlocking is necessarily required to be done to isolate front
axle & transfer case from transmission & from front wheels
Caution Caution
Caution Caution Caution
If auto - lock hubs make a clattering noise when driving in 2H
mode, stop and move the vehicle about 2 to 3 meters in bacward
direction.
Note : Note :
Note : Note : Note :
When engaging & disengaging, the auto-lock hubs will make a
clicking noise. It is normal.
Shifting Driving Modes Shifting Driving Modes
Shifting Driving Modes Shifting Driving Modes Shifting Driving Modes
(31) Mahindra THAR