9 Prepare to Ride
l
Check underneath vehicle for any debris on chassis or sus-
pension and clean them properly.
l
Check operation of indicator lamps.
o
This can be done during the first few seconds of key ON.
l
Check operation and cleanliness of headlights and taillights.
l
Check operation of high and low beam headlights.
l
Check operation of brake lights.
l
Check seats are properly latched.
l
Check side nets for any damage, fasten both side nets and con-
firm they latch securely. Use the adjustment strap to tighten nets
as required.
l
Check seat belts for any damage, fasten seat belts and confirm
they latch securely.
l
Press on the accelerator pedal a few times to ensure it operates
freely and it returns to the rest position when released.
l
Press on the brake pedal and make sure you feel firm resistance
and it returns to the rest position when released.
l
Check the fuel level.
l
Adjust mirror(s) to your preferences. (If equipped)
What to do after starting the Engine
l
Check if steering wheel operates freely by completely turning it
from side to side.
l
Turn the ignition switch to OFF to verify if engine will shut down.
Restart engine.
l
Check smooth and free operation of shift lever.
l
Check smooth and free operation of 2WD/4WD selector.
l
Drive forward slowly a few feet and apply brakes. The brake
pedal must feel firm when applied. The pedal must return to rest
position when released. The brakes must respond adequately to
the operator's input.
l
Check parking brake operation.
Damaged or missing seat belts, shoulder guards and
side nets should be replaced immediately to help prevent an occu-
pant from being ejected, resulting in severe injury or death.
Refer to section
for more information
on fluid volumes and specifications.
Refer to section
for more detailed
instructions where applicable.
© 2018 Mahindra Vehicle Sales and Service, Inc. All Rights Reserved.
23
