MAHINDRA APPLITRAC
2.6 Top Link
Where there are alternative fitting positions at the tractor for the top link, fit
the top link tractor-sided as high as possible.
2.7 Chain and stabilizer of the three-way linkage
The chain or stabilizers must be adjusted so that they ensure adequate lateral
moments at the lower link of the tractors during work
They must be laterally locked if the lower links are raised and are in the
transport position.
Some makes of tractor equipped with automatic side structs, it must be
specially adjusted.
If the tractor suddenly pulls to one side implement works with different
widths on the right and left, this may cause by the side struts not having
been released. The function of the locking device of the automatic side
should be checked and readjusted if necessary. See the operating manual
provided by the tractor manufacturer.
2.8 Hydraulic
For work the tractor hydraulic must be set to draft or mixed control. See
manufacturer instruction.
2.9 Hydraulic Equipment Required
The implement is supplied at standard with separate hydraulic coupling for
each consumer. The protecting caps on the hydraulic couplings are colored and the
hydraulic couplings themselves are marked alphanumerically.
In order to operate the hydraulic devices, the tractor must be equipped with a
double acting spool valve.