©
2012 Mahindra & Mahindra Ltd
. All rights reserved. This book may not be reproduced or copied, in whole or in
part, without the written permission of Mahindra & Mahindra Ltd.
Good Workshop Practices
Attire/Dress
•
Always wear clean uniform
•
Wear safety shoes
•
Wear gloves, when required
•
Wear belt cover
Vehicle Protection
•
Put seat cover, fender cover, steering wheel cover, before starting the operations.
Safety
•
When working with 2 or more persons, be sure to check safety for one another
•
When working with engine running, make sure to provide ventilation for exhaust
fumes in the workshop
•
If working on high temperature, high pressure, rotating, moving or vibrating parts,
you should wear appropriate safety gear and take extra care not to injure yourself or
others.
•
When jacking up the vehicle, be sure to support the specified location with a safety
stand.
•
When lifting up the vehicle, use appropriate safety equipment.
Parts and tools
•
Before starting operation, prepare tool stand, MST, Gauges, oils and parts for
replacement.
Removed Parts
•
Place removed parts in a separate box to avoid mixing them up with new parts or
contaminating new parts.
•
For non-reusable parts such as gaskets, O-rings, and self-locking nuts, replace them
with new ones as instructed in the manual
•
Retain the removed parts for customer inspection, if requested.
