Diagnostic Manual ( EMS)
LCV MDI BSIII CRDe
Rev 01- Mar 14
All copyrights reserved by
The repair methods given by the manufacturer in this document are based on the technical specifications current at the time of release.
The methods may be modified as a result of changes introduced by the manufacturer in the production of the various component units
and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of whole of the present
document, are prohibited without the prior written consent of 2014 Mahindra & Mahindra Ltd (Truck & Bus Division)
Battery voltage signal:
DTC
Diagnostic item
P0562
P0563
P1560
Battery Voltage falls below 6 volts
Battery Voltage falls below 18 volts.
A-D Convertor Fault.
TO CHECK
TO RECTIFY
1. Battery and ECU connections
1. Connect properly
2.Resistance between chassis & ECU
ground
2. Fix ECU & Battery ground firmly
3. Battery charge circuit (Insulation on
battery positive cable)(Alternator circuit)
3. Change battery positive cable
4. Battery voltage at key on (min 9 V)
(Min voltage for ECU is 6 volts - considering
2.5 Volts reduction during cranking)
4. Change battery
P0562
P0563
P1560
Summary of Contents for Cosmo
Page 55: ......
