Mahindra 2016 KUV100 K2 Owner'S Manual Download Page 192

Page: 192 / 212

14-11

•

Petrol

S12P17

•

Diesel

S12P18

•

Oil levels above the ‘Upper Dot’ mark may cause engine
damage/poor performance.

•

Put the dipstick and the oil filler cap back and ensure it is fully/
properly seated.

To avoid possible oil loss and injury due to hot blow-by gas,

NOT

operate the vehicle with the engine oil level dipstick and/or

the engine oil filler cap removed.

Draining/Changing of engine oil should always be done by an
Authorized Mahindra Dealer.

14.5.5 Checking/Topping Engine Coolant Level

•

Park the vehicle on a flat-horizontal surface. Keep the parking
brake fully engaged. Shut-off the engine

MAX

MIN

S12P06

•

Wait till the engine cools down and hence coolant temperature
comes down to normal room temperature

MAINTENANCE

Summary of Contents for 2016 KUV100 K2





















































































































































































































Search results

Summary of Contents for 2016 KUV100 K2

Reviews:

Related manuals for 2016 KUV100 K2

Brands by name

Popular brands

Mahindra 2016 KUV100 K2, Owner'S Manual

Search results

Summary of Contents for 2016 KUV100 K2

Reviews:

Related manuals for 2016 KUV100 K2

Brands by name

Popular brands