Mahindra 10 Series, Operator'S Manual

Page: 10 / 120

FUEL INJECTION PUMP OR NOZZLES – Fuel injection pumps or nozzles are subject to tip wear as a
result of fuel contamination. This damage can cause an increase in fuel consumption, the engine to emit
black smoke, misfire or run roughly. Inspect, test, and replace if necessary.
Fuel injection pumps can be tested by an authorized Daedong engine dealer.
TURBOCHARGER – Check for any unusual sound or vibration in the turbocharger. Inspect inlet and
exhaust piping and connections. Check bearing condition and perform maintenance as described in the
Maintenance Schedule.
Slow engine response and low power may indicate a need for adjustment or repair.
Your Daedong engine dealer is equipped with the necessary tools, personnel, and can perform this
service.
The owner is encouraged to keep adequate maintenance records, but the absence of such, in and of
itself, will not invalidate the warranty.
The machine or equipment owner may perform routine maintenance, repairs and other non warranty
work or have it done at any repair facility. Such non-warranty work need not be performed at a
designated warranty station in order for the warranty to remain in force.
CUSTOMER ASSISTANCE – EMISSION CONTROL SYSTEM WARRANTY;
Daedong-USA INC. aims to ensure that the Emission Control Systems Warranty is properly
administrated.
In the event that you do not receive the warranty service to which you believe you are entitled under the
Emission Control System Warranty, call or write to.
Daedong-USA, INC.
at 1801 Quality Drive
Tel. No ; 1-252-291-6111
Tel. No ; 1 252 291 6111
Fax. No ; 1-252-291-9161
-Authorized dealers are recommended for major maintenance and repair work as they are staffed with
trained personnel, proper tools and are aware of the latest maintenance methods and procedures.
Owners and others who desire to perform their own work should purchase a Service Manual and obtain
current information from their Daedong engine dealer .
-In the case of purchasing the equipment on which Daedong engine is mounted, if the
equipment is not manufactured by Daedong the equipment owner will make contact with the equipment is not manufactured by Daedong, the equipment owner will make contact with the
purchasing dealer.
6