Mahe MSV-2010, Operator'S Manual

Page: 7 / 35

7
2.4 DURING USE
1. To prevent electrical shock, the endoscope and /or any other ancillary device should NEVER be applied
directly to the heart.
2. Make sure that contact is made between the patient and this equipment.
3. To avoid damage to the front panel keyboard do not press any keys with any sharp or pointed objects.
4. The light emitted by a Xenon or Metal Halide Light Source is extremely intense. Avoid looking directly at the
light exiting the endoscope and/or this equipment.
5. During clinical procedures, avoid unnecessary prolonged use, which could compromise patient/user safety.
6. Continually monitor this equipment and the patient for any signs of irregularities.
7. Do not connect or disconnect the camera head during operation. This may cause unrecoverable damage to the
camera head.
8. In the event that some type of irregularity is noted to the patient or this equipment, take the appropriate action
to ensure patient safety.
9. If the operation of any of the components of the endoscopic system fails during the procedure and the
visualization of the procedure is lost or compromised, place the endoscope in the neutral position and slowly
withdraw the endoscope.
10. This equipment should only be used according to the instruction and operating conditions described in this
manual. Failure to do so could result in compromised safety, equipment malfunction or instrument damage.
11. To prevent fire or electric shock, do not open or expose the camera control unit to rain or moisture. Refer all
servicing to qualified personnel only.
2.5 AFTER USE
1. Refer to the operating instructions supplied with all the components of the endoscopic system to establish the
right order in which components should be turned off. Some peripheral devices may have been turned off first
to avoid compromising their operation.
2. Wipe all surfaces clean with gauze slightly dampened with alcohol.
3. Be sure connector interfaces and ventilation ports are not allowed wet or splashed with liquids.
2.6 STORAGE
1. This equipment should NEVER be stored in areas where the unit could get wet or be exposed to any
environmental conditions such as high temperature, humidity, direct sunlight, dust, salt, etc., which could
adversely affect the equipment.
2. This equipment should NEVER be stored in the presence of flammable or explosive gases or chemicals.
3. This equipment should NEVER be stored or transported in an inclined position, nor should it be subjected to
impact or vibration.
4. Cords, accessories, etc., should be cleaned and neatly stored.
5. This equipment should be maintained in a clean condition during storage and be ready for subsequent use.
2.7 SERVICE
1. Alterations/modifications to the equipment should NEVER be made. Repairs should only be performed by an
authorized MAHE service facility.
2.8 MAINTENANCE
1. Periodically this equipment and any applicable accessories should be inspected for operation and safety.
2.9 DISPOSAL
1. The equipment should be returned for disposal to MAHE. Contact your local MAHE representative or service
facility.