87
BA053101-en
Pos: 304 /Technis che Dok umentation/A lle G eräte/ Überschr iften/Üb erschriften 1.1/ T/Überschrift 1.1: Tacho-Kontrolle @ 13\mod_ 1234783352910_75.d ocx @ 340245 @ 2 @ 1
10.4
Speedometer Check
Pos: 305 /Technis che Dok umentation/ Leis tungsmesstechnik/POWE RDYNO/052301 LPS 3000 R100/BA/Inhalt: 0523 Tacho- Kontr olle @ 13\mod_ 1234783396154_ 75.docx @ 340271 @ @ 1
Use this menu point to test the vehicle’s speedometer. The following functions can be checked.
•
Vehicle speed
•
Mileage
Pos: 306 /Technis che Dok umentation/A lle G eräte/ Überschr iften/Üb erschriften 1.1.1/ F/Überschrift 1.1.1: Fahrzeug-G eschwindigkeit @ 13\mod_ 1234783560798_ 75.docx @ 340297 @ 3 @ 1
10.4.1
Vehicle Speed
Pos: 307 /Technis che Dok umentation/ Leis tungsmesstechnik/POWE RDYNO/052301 LPS 3000 R100/BA/Inhalt: 0523 Fahrzeug-G eschwindigkeit @ 13\mod_ 1234783610519_ 75.docx @ 340323 @ @ 1
Ten freely selectable speedometer target speeds can be entered using this menu point. Each one
can be approached, one after another. A basic setting is done at dyno configuration.
1 Position the vehicle on the dyno and fix it.
2 Call up the menu SPEEDOMETER TEST and
then the menu point VEHICLE SPEED.
The following screen appears:
3 Use the key <F6 PROCESS> to change the
target speeds.
The value v-act shows the current speed of
the vehicle on the rollers. The target speed v-
speed must be approached with the vehicle
speedometer.
4 Use the button<F8 CONTINUE>.
5 Accelerate the vehicle to the target speed.
Base it on the vehicle speedometer.
6 If the speed is held constant for 3 seconds,
the value is automatically taken over. Other-
wise store the measurement value with <F8
CONFIRM>.
The display jumps to the next target speed.
7 Repeat the test for each target speed.
Use the <F5 RETURN> to jump back to the previous target speed.
Use the <F7 PASS OVER> key to jump to the next target speed.
