MH-C777PLUS-II User’s Manual
13
Note: In certain cases, the charging capacity may appear to be
normal (meaning close to the rated capacity) even though the
battery doesn’t last very long in your equipment. To determine the
a
ctual capacity of the battery pack, you must use the “analyze”
function covered in Chapter 6.
Voltage (V)
: This number represents the battery pack voltage
during charging.
Note: When you charge battery packs with 3 or less battery cells,
the voltage reading might appear higher than usual. This is due to
the limited voltage sensor resolution at lower voltage and does not
indicate a problem during the charging process.
Time Elapsed (min):
The charger features an internal clock that
displays the time (minute) elapsed during the charge. The time will
continue to increase until the charging is terminated.
Battery Mode:
The LCD will show “
NI
” for Nickel Metal Hydride
and Nickel Cadmium battery packs, and “
LI
” for Lithium Ion battery
packs. This is based on y
our selection using the “battery selector.”
Charge Status:
When rapid charging, the LCD screen will indicate
“
QUICK CHARGE
.” When the charging process terminates, the
symbol “
FULL
” will be displayed.
7. The charger is a microprocessor driven unit that will automatically
terminate rapid charging and enter a gentle slow trickle charging
when the battery pack becomes fully charged. When this happens,
the charger emits several long beeps and the LCD screen will
display “
FULL
” indicating full charge. At this time, you may either
remove the battery pack for immediate usage, or leave the battery
pack on the charger for trickle charging.
FULL
