MH-C777PLUS-II User’s Manual
12
4. Place the magnetic temperature sensor on the battery pack.
Note: It is important that you place the temperature sensor directly
on the batteries if you are charging individual battery cells like AA,
AAA, C or D size batteries.
5. By default, the charger will automatically enter the rapid charging
cycle. From this point forward, no further user intervention is
needed.
In the first 3 minutes of the charging process, the charger will apply
a “surface charge” to the battery pack. This is designed to help the
charger properly recognize the battery voltage. After the first 3
minutes, the charger will detect the voltage and begin the actual
charging. Note that the LCD capacity accumulation and timer will
reset after the surface charge has been applied.
6. Throughout the charging process, the LCD screen will display
various statistics about the charging process. The LCD screen will
alternate between “charging capacity” and “time elapsed” while
displaying
other information like “battery chemistry” and “charge
status”, and “voltage”.
Charging Capacity (mAh):
This number represents the amount of
charge already applied to the battery pack. This number will
continue to increase until the charging is terminated. Generally
speaking, the charging cycle is near completion when the charging
capacity surpasses the rated capacity of the battery pack. Please
note that the charging capacity is
not
the actual battery capacity.
It
is normal for the charging capacity shown on the LCD screen
to exceed the rated capacity by up to 15%.
Battery Mode
Voltage
Charging
Capacity
Charge Status
Battery Mode
Voltage
Time
Elapsed
Charge Status
MIN
