32
BA022301-en
•
Re-display of the measurement value: Use the scroll key to go to the axle and
press Return. Re-display of side-slip and shock absorber is not possible with
the RECO 1.
•
If NEW (E) is confirmed with Return, then all existing measurement values are
deleted.
Brake Tester without Weighing Machine
If there is no weighing machine, this can be entered at the end after Auto OFF
using the scroll key and Return. Visible by the last 4 LEDs (F) which are flashing,
and by the analog pointer.
If there is a side-slip tester, shock absorber tester or both, a new vehicle (NEW)
must be set up after Auto OFF. If not, these measurement values from the previ-
ous vehicle are still active.
Pos: 108 /-----Format- ----/MANUE LLE R UMBRUCH Seitenumbruch @ 0\mod_ 1134403577687_0.docx @ 1277 @ @ 1