MAHA CONNECT Series, Original Operating Instructions

Page: 114 / 138

114
BA023001-en
11.3.2 Scope of delivery
•
Universal analogue display with three hand clocks, model: C_MSA
•
2 m network patch cable
•
1 plug-in power supply unit 12 V DC / 2 A
11.3.3 Technical data
•
W x H x D approx. 910 x 585 x 70 mm
•
Splash-proof design for outdoor operation
•
Anti-reflective PMMA lens (plastic)
•
Mount VESA standard 200 x 100 mm
•
Weight without bracket 13 kg
•
Display range 0 – 8 kN and 0 – 45.5 kN
•
Difference display 0 – 70 %
•
3 LEDs for status, (small measuring range / large measuring range / ready for brak-
ing), the LED for small and large measuring range is also the mains ON lamp)
•
Power supply via plug-in power supply unit 12 V DC, current consumption < 1 A
•
NOTICE
Only use power supplies with e.g. 12 V DC / 5 W according to IEC 62368-1.
•
Data interface LAN or WiFi (2.4 GHz)
11.3.4 Installation
The C_MSA can be installed either on a wall mount or on a stand.
Installing the wall mount
The hole pattern for mounting a display unit conforms to the following VESA standard:
100 x 100; 200 x 100; 100 x 200; 200 x 200
NOTICE
If a wall mount according to VESA standard is provided by the customer, it must be
ensured that the selected mount is suitable for the weight of the analogue display.
The wall mount is suitable for holding all MAHA-CONNECT display units as well as the
most common TV screens/Smart TV according to the specified VESA standard. The
swivel arm can be locked to the wall bracket by means of a locking bolt with pull cable.
On the VESA mount, two self-locking nuts can be used to adjust the sluggishness of the
rotation.
Installation accessories:
•
4 pcs. hexagonal wood screws 8x70 mm, MAHA # 22 0571 08070 1
•
4 pcs. 10 mm dowels, model: Fischer-DUOPOWER 10 x 50, MAHA # 1405584