Magus 21Series, User Manual, Page: 48 / 78

Page 48/78
Video Loss: the absence of video images. Camera damage or completely covered will result in video loss.
Occlusion detection: When the image blur, block area identified by standards, are to determine the camera is blocked.
Dynamic testing: activities within the image on the monitor screen of intelligent analysis, the sensitivity adjustment on the monitor
screen through the activities of the perception of intensity agility, the higher the sensitivity setting, a small screen activities, such as leaves,
time will trigger the motion detection switch. Independent testing to support 64 square area, according to the need to select the focus
detection area, unsetted the detection area image, will not trigger motion detection switch.
Enabling switch: linkage of master switch, easy to open and close all joint functions.
Bottom of the screen all the settings take effect the switch button, solid square, in cable with the video test conditions, the device will
perform recording, PTZ linkage, alarm pre-set action.
Video channels: when one channel video detection meet the conditions, support multiple channels to stimulate start recording, the
camera can be realized from the intake bypass blocked areas of the video data to multi-faceted, multi-angle, multi-zone video and other