Magus 21Series, User Manual

Page: 16 / 78

Page 16/78
16 Multi image
Image will switch to 1/4/9/16 screen in cycle on spot;image switch normal / full screen display on
playback status.
17 PTZ switch control
On PTZ switch control spot image status, to start PTZ control buttons; when on playback status,
start the AB Cut function
18 Clear
On spot image status, clear the alarm port, returned to normal; on playback status, turn on the
video list loop play.
19 Mute Turn off sound
3.3 Icon instruction
MONITOR SCREEN IS LOCKED；
MOTION DETECT IS TRIGGERED TO MARK THE CHANNEL WHICH SHOULD BE PAY ATTENTION TO；
RECORD MARK, LABELING THIS CHANNEL IS RECORDING NOW；
CAMERA VIDEO SIGNAL IS LOST ；
THE CURRENT SCREEN CAN BE PARTIALLY ENLARGE LOGO, PRESS THE LEFT MOUSE BUTTON, DRAG THE RECTANGLE,
RELEASE THE LEFT BUTTON, THE RECTANGLE IMAGE TO ENLARGE TO FULL SCREEN THE WINDOW；
ENLARGED WINDOWS PARTIALLY, ENLARGED STATE IS NOT ACTIVATED
INSTRUCTIONS CD / DVDRW IS CONNECTED TO STANDBY;
INSTRUCTIONS DIAL-UP NETWORKING (PPPOE / CHINA UNICOM 3G / MOBILE 3G / TELECOM3G) CONNECTION STATUS；
INSTRUCTIONS THE ESATA STORAGE DEVICE IS CONNECTED, ON STANDBY；
Instructions no hard disk in DVR. Device operate without hard disk , the buzzer will sounds 4 short tone;
INDICATE THE SD CARD STORAGE DEVICE IS CONNECTED TO STANDBY;
INDICATES THE MUTE STATUS;
INDICATES THAT THE USB STORAGE DEVICE IS CONNECTED TO STANDBY