Magus 21Series, User Manual

Page: 54 / 78

Page 54/78
Event Type: support for non-hard drive, disk error, hard disk no space (hard disk is full), network disconnected, IP conflicts,
unauthorized access, format does not match the video anomalies and other anomalies.
Enabling switch: linkage moves the master switch, easy to open and close all joint functions.
The following actions need to be selected as the solid box corresponds to take effect.
Alarm output: abnormal events, board alarm port after device closure.
Output Delay: abnormal event disappears, the alarm output time.
Screen: dynamic test conditions occurs, the screen text to remind the user's attention.
Buzzer: The device built-in buzzer switch.
Alarm Upload: video detection condition occurs, an alarm is triggered uploaded to the network center, network center address set see
(Main Menu - System Settings - Network Settings) section.
Alarm Upload: video detection condition occurs, the trigger to capture an image and send image files to the designated web-mail, e-mail
address set see (Main Menu - System Settings - Network Settings) section.
5.3.3 Alarm output
Set the alarm output port, select the check means; press the OK
button to save and exit, press the Cancel button to cancel the save and
exit;
Manual on / off the corresponding alarm output port.
5.3.4 video control
Take 4.3 passage for reference.