R
ULES
33
DEUTSCH
ENGLISH
R
ULES
W
ARRANTY
Parts, components and assemblies subject to normal wear and tear are
not covered under this warranty.
The warranty can expire when use according to the terms is no longer
applicable. To this appropriate use also belongs the conditions for operating,
maintaining and servicing as prescribed in the manual.
Like every other product, the fork also contains parts that wear out as
time passes by. The life span of these parts depend on the type and
frequency of use, as well on care and maintenance. Please note that the
usual wear of parts is normal and therefore no reason for objection. This
especially applies to: bushings, seals and the surface of the stanchions.
Machining or facing of the disc mounts on the fork is not allowed, as the
corrosion protection will be damaged. It’s not necessary, as the mounts
are machined previously before coating.
Warranty duration and laws may vary from state to state and/or country
to country.
Warranty cases should be dealt normally by your dealer. But you can send
warranty cases also directly to MAGURA or the official service partners.
We point out that a warranty case can only be handled with an enclosed
proof of purchase.
The warranty can expire when:
h
Abnormal strain, neglect, abuse and/or misuse.
h
Accident or collision damage.
h
Application of not-original MAGURA parts and lubrication products.
h
Changing the surface (e.g. painting, machining or facing of the disc
mounts, ...).
h
Changing of the structure (e.g. drilling holes, assembly of lowriders, ...).
h
Opening the eLECT unit.
h
Removal or garble of the serial number.
h
Incorrect maintenance.
h
Transport damage or loss.
h
Exceeding the system weight of 130 kg (286 lb).
The staff at MAGURA work continuously on improving our products in the context of ongoing technical
development. For this reason, we reserve the right to make changes compared to the figures and
descriptions in this User Manual. This does not entitle you to claim for changes to products that we
have already delivered. For up-to-date information, visit www.magura.com
Technical dimensions and weights are to be understood subject to normal tolerances.
Reproduction or translation of this User Manual, or parts of it, is subject to written permission by
MAGURA.
We reserve all rights under copyright law.
D
ECLARATION
OF
CONFORMITY
The
eLECT
system for electronic control of the compression stage dam-
ping (suspension fork, rear shock) and height regulation (seat post)
conforms to the requirements of EU Directives 2014/53/EU (radio equip-
ment and telecommunications terminal equipment) and 2014/30/EU
(electromagnetic compatibility).
FCC ID: 2AF4AELECT
IC: 20786-ELECT
MODEL:
'03,
This device complies with Part 15 of the FCC Rules and with Industry
Canada licence-exempt RSS standard(s). Operation is subject to the fol-
lowing two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interfe-
rence that may cause undesired operation.
The detailed original declarations of conformity can be requested at
www.magura.com
Summary of Contents for TS6
