M A G U I R E P R O D U C T S , I N C .
Rev: January 15, 2019
8
L o P r o R e c e i v e r
Filter Cleaning or Replacement
1) Turn off power on loader.
2) Disconnect the material line, signal cable, and compressed air.
3) Release spring latches, and remove controller portion.
4) Remove / replace filter (Maguire part #: ashffd4). Dome side of filter facing toward the material
portion.
5) When reinstalling the controller portion of the receiver, make sure that the material inlet is lined up
and slides in smoothly into the respective grommet. Then, fasten the 2 spring latches.