4
Magtrol Model 6400 Torque Transducer Display
Chapter 1 – Introduction
GENERAL
INFORMA
TION
6400
Due to the continual development of our products, we reserve the right to modify specifi cations without forewarning.
S pe cifica tion s
6400-US www 06/04
SYSTEM OPTIONS/ACCESSORIES
MEASUREMENT CHARACTERISTICS
Accuracy
Speed
Torque
Aux
0.01% of reading from 10 rpm to 100,000 rpm
0.1% of range (± 10 V)
0.1% of range (± 10 V)
Maximum Speed
99,999 rpm
ELECTRICAL CHARACTERISTICS
Fuses (5 × 20 mm)
Power (120 V): 200 mA UL/CSA 250 V SB
Power (240 V): 80 mA IEC
250 V T
Power Requirements
16 VA
Voltage Requirements
120/240 V 60/50 Hz
INPUTS AND OUTPUTS
Auxiliary Input
± 10 VDC
Maximum Torque Input
± 10 VDC
Torque Output BNC
±10 VDC (direct from TM)
Speed Output BNC
0 to 5 VDC pulse (direct from TM)
Description
Model/Part #
Torque Transducer Software
SW-TM-WE
Transducer Software with source codes
SW-TM-WS
Torque Transducer Connector Cable-5/10/20 m ER 113-01/02/03
ENVIRONMENTAL CHARACTERISTICS
Operating Temperature
18 ºC to 25 ºC
Relative Humidity
< 80%
Temperature Coefficient 0.001% of range/°C
MECHANICAL CHARACTERISTICS
Width
19.0 in
483 mm
Depth
12.4 in
315 mm
Depth with handles
13.8 in
351 mm
Height
3.5 in
89 mm
Weight
14.5 lb
6.58 kg
RS-232 and GPIB/IEEE-488
Interfaces for Connection to PC
Auxiliary Input Accepts
±10 VDC Transducer
For Use With Any Magtrol
TM, TMB and TMHS Torque Transducer
Speed
Output
Torque
Output
FRONT PANEL
REAR PANEL
Tare Function
Set Desired Torque Units
(oz.in., oz.ft., lb.in., lb.ft., g.cm, kg.cm, Nmm, Ncm, Nm)
Internal
Memory
Ready for Rack Mounting
Displays Torque, Speed and
Mechanical Power Values,
and Direction of Rotation
Enables Pass/Fail Testing
of Torque, Speed or
Auxiliary Input
Set Desired Power Units
(W, kW, Hp, Aux.)
ORDERING INFORMATION
6400 Torque Transducer Display 120 VAC
6400A Torque Transducer Display 240 VAC