4 - Operation
DynaPro Mini| PIN Encryption Device | Installation and Operation Manual
Page 21 of 28 (
D99875642-13
)
4.3.2
How to Use Contact Chip Cards
To use a contact chip card, cardholders should wait until the appropriate prompt appears on the display
and the LED on the front of the device turns on, then insert the card as follows:
1)
Locate the slot on the front of the device shown in
2)
Orient the chip card so the chip faces the ceiling and toward the slot.
3)
Insert the chip card into the slot, then push gently on the card until it stops. There should not be any
substantial resistance until the chip card is fully inserted.
If the device can not communicate with the chip card, it may prompt the cardholder to insert the card
again, or to use the magnetic stripe reader, or to enter card data manually.
Figure 4-5 - Inserting a Chip Card Into DynaPro Mini
