3 - Installation
DynaPro Mini| PIN Encryption Device | Installation and Operation Manual
Page 14 of 28 (
D99875642-13
)
3
Installation
Installing DynaPro Mini is a straightforward process; the acquirer configures the Certificate Authority,
public keys, terminal and payment brand settings before deployment; end users need only set up a host
with appropriate software, configure the software, and connect the device to the host. This section
provides general information about solutions that incorporate DynaPro Mini, including host software,
connecting the device, and charging the device.
3.1
About Software
In any solution, DynaPro Mini is connected to a host, which must have software installed that knows how
to communicate with the device, and which is capable of processing transactions. To set up the host to
work with DynaPro Mini, follow the installation and configuration instructions provided by the vendor of
the host or the host software.
3.2
About Connecting DynaPro Mini
The following sections provide steps for connecting DynaPro Mini to a host via the various available
physical connection types.
3.2.1
How to Connect DynaPro Mini to a Host via USB
To connect DynaPro Mini to a host computer or charger using the Micro-USB port, follow these steps:
1)
Make sure the host is powered off.
2)
Connect the small end of the USB cable to DynaPro Mini as shown in
3)
Connect the large end of the USB cable to the charger or to the host computer’s USB port.
4)
Power on the host computer.
Figure 3-1 - Connecting DynaPro Mini to a Computer
3.2.2
How to Connect DynaPro Mini to a Host via Bluetooth LE
To connect DynaPro Mini with Bluetooth LE to a host that has Bluetooth 4.0 hardware and supports
Bluetooth LE:
1)
On the host, install and configure the software you intend to use with DynaPro Mini. If you do not
yet have that software, you can download a tool from the App Store called “Light Blue,” which
provides functions to detect the device, connect to the device, and view the device’s services and
characteristics. See https://itunes.apple.com/us/app/lightblue/id639944780.
2)
Make sure the device is powered on and advertising by briefly pressing and releasing the power
button or connecting the device to USB power. Note that it is not always necessary to explicitly turn
