Magstim BiStim²
Operating Manual
© The Magstim Company Limited
5
MOP02-EN-02
SECTION 3 PRODUCT DESCRIPTIONS
3.1
Front Panel
The front panel, shown below, allows control of the Magstim Bistim² and provides the connection for
the stimulating coil.
Note:
UI functions described in this section are to be performed on the master unit UI (Bistim² UI).
Control functions/buttons are not activated on the slave unit UI (200² UI) therefore cannot be used to
control system. The only function/button that may be used is the system stop button.
Figure 3.1: Detailed front panel
The upper unit is considered the master unit. The lower unit is considered the slave unit.
All operating functions described in this section assume that the mains power switches, located on
the rear panel of the master and slave units, are switched on.
3.1.1
On/Off Button* (1)
The on/off button toggles the master and slave units of the Magstim Bistim² between on and standby.
3.1.2
Armed Indicator* (2) & (9)
The armed indicator illuminates when the unit is armed allowing it to be triggered.
1
2
3
4
5 6 7
8
9
10
11
15
13
12
14
Master
Slave