13
4.2.3 Wheel Set Installation
As the following photos, the red circle in figure 1 shows the screws for install the
wheel set into the Auto. Conveyer’s side guide block (same to the other side). After
tight the screws, please move the wheel set toward and back ward twice. Make sure
the wheel set can smoothly moving. Next, connect the communication cable, shown
in figure 2.
4.2.4 Adjustable paper collector assembly
As the following photo, hang the adjustable paper collector assembly into the machine
with the 3 red circled area. Note: Since the paper will exit on there and return to
internal during folding, please make sure the exit paper will not hit any side and back
guides.
①
②
Side
guide
Back guide
Extension
Support
Main body
