4. Start the LaserOS app.
You may download the app from here:
http://www.magnumlighting.com/LD1000
If you get an error with OSX security preferences, locate the app in Finder, right-click on the app
file and choose “Open” to allow the app to run.
5. The LaserOS app will detect if the LD1000 is connected. It can then be turned on or off from the
power menu in the top left corner of the app.
Note: While securing projector aiming, turn off the unit and remove the key. Check for the proper
beam block setting. Repeat until beam block prevents any scanning into audience areas.