Getting Started
312082B
7
Getting Started
Trigger Lock
Always engage the trigger lock when you stop spraying
to prevent the gun from being triggered accidentally by
hand or if dropped or bumped.
Pressure Relief Procedure
Follow Trigger Lock when you stop spraying and before
cleaning, checking, servicing, or transporting equip-
ment.
1.
Set AllControl to OFF. Unplug
sprayer.
2.
Hold gun firmly to the side of a pail. Trigger the gun
to relieve pressure.
3.
Engage trigger lock. See Trigger Lock, page 7.
If you suspect the spray tip or hose is clogged or that
pressure has not been fully relieved after following the
previous steps, VERY SLOWLY loosen tip guard retain-
ing nut or hose end coupling to relieve pressure gradu-
ally, then loosen completely. Clear hose or tip
obstruction. Read Unclogging Spray Tip, page 11.
AllControl
™
Settings
Locked
Unlocked
ti8923a
ti8922a
ti9168a
ti9207a
STORAGE - long term
and overnight shutdown
PRIME/CLEAN PUMP
ROLL - directs low pressure
fluid to roller (when used)
LOW SPRAY - uses low
pressure to direct fluid
to spray gun
HI SPRAY - uses high
pressure to direct fluid
SETTING INDICATOR -
- turns on motor and
PRIME/CLEAN GUN &
HOSE -
directs fluid to
and storage
shutdown and relieves system
pressure
OFF -turns motor off for short term
directs fluid to prime tube
gun and hose
selects function
to spray gun