Storage
312082B
21
Storage
Short Term Storage
(up to 2 days)
1.
Turn AllControl to OFF. Pause 2-3 seconds to allow
pressure to be relieved, then turn to STORAGE.
2.
Place suction and drain tube
in paint can.
3.
Cover can and hoses tightly
with plastic wrap.
4.
a.
Engage trigger lock.
b.
Leave gun attached to
hose.
c.
Remove tip and guard
and clean with water or
flushing solvent. A soft
brush can be used to
loosen and remove dried
on material if needed.
d.
Wipe paint off outside of
gun using a soft cloth moistened with water or
flushing solvent.
Long Term Storage
(more than 2 days)
1.
Place suction tube in Pump
Armor storage fluid bottle
and prime tube in waste pail.
2.
Set AllControl to PRIME/CLEAN
PUMP.
3.
When storage fluid comes out of
prime tube (5-10 seconds) turn
AllControl OFF.
4.
Wait 2-3 seconds to allow
pressure to be relieved, then
turn AllControl to STORAGE.
ti9168a
Pause
2-3 Seconds
ti9174a
ti9578a
ti8923a
ti9671a
•
Always circulate Pump Armor storage fluid
through system after cleaning. Water left in
sprayer will corrode and ruin pump.
•
Follow Shutdown and Cleaning, page 16.
Be sure to turn AllControl to OFF and pause 2-3
seconds before turning AllControl to STORAGE to
relieve pressure in the system.
TIA
ti9169a
ti9168a
ti9174a