Magnum Industrial MI-91400, Parts Breakdown

Page: 4 / 13

ASSEMBLY INSTRUCTIONS
MAGNUM INDUSTRIAL MI-91400 DELUXE 14” BAND SAW
Take the band saw out of the box and lay it on its
as shown in fig-8. You can place the carton on
the floor under the band saw preventing it from
getting scratched.
Position the motor on the band saw and carefully
insert the motor pulley through the hole as shown
in fig-9. Align the holes on the motor mounting
bracket with the holes on the band saw base.
Insert the carriage bolts from under the base
through the holes, place washers, and tighten the
nuts provided onto the carriage bolts. Do not fully
tighten the nuts at this time.
Place the stand and the band saw upright.
Get the help of a friend or assistant and lift the
machine and place it on the stand. Align the
mounting holes on the machine with the holes on
the stand and secure the machine on to the stand
Open the lower cabinet door and position the
V-belt onto one of the grooves on the idler pulley.
Now pull the V-belt and position it onto the
aligned groove on the motor pulley and tighten
Once the motor is mounted, connect the power
coming from the motor to the power cord from
the machine. Do not connect the machine to the
power source at this time.
Motor Mounting
Nuts & Screws
Idler Pulley
Motor Pulley