Magnum Industrial MI-52100, Operating Manual

Page: 7 / 13

6
ASSEMBLY INSTRUCTIONS
MAGNUM INDUSTRIAL MI-52100 10" OVERARM BLADE GUARD
ASSEMBLING DIAGONAL BRACES
To assemble the diagonal braces, follow these steps:
1. Spin a 1/4" HEX NUT (B) onto each EYEBOLT (A) . See
Figure 9.
2. Pass one EYEBOLT through the hole in the bent end
of each DIAGONAL BRACE (C) . Secure the EYEBOLTS
to the DIAGONAL BRACES with a LOCK WASHER (D)
and another 1/4" HEX NUT (C) . Allow the EYEBOLT to
protrude 3/4" past the second 1/4" HEX NUT . See Figure
10.
3. Fasten a brace mount ANGLE BRACKET (E) to each
eyebolt with a 1/4" X 3/4" FLAT HEAD BOLT (F) , LOCK
WASHER (G) and HEX NUT (H) . See Figure 11 for order
of assembly. Construct the two brace assemblies so they
mirror each other. See Figure 12.
Once you've built the brace assemblies, you can set them aside.
INSTALLING BOOM MOUNT ASSEMBLY
1. Insert the EXTENSION LEG (I) into the UPPER LEG (J) of
the boom mount channel. See Figure 13.
2. Using the two supplied LOCK KNOBS (K), secure the
extension leg in the upper leg at the desired height.
See Figure 14.
FIGURE 9: THREADING HEX NUT ONTO EYEBOLT
FIGURE 10: INSTALLING EYEBOLT IN BRACE
9
10
12 11
FIGURES 11 and 12: BRACE ASSEMBLY INSTALLATION ORDER
FIGURES 13: BOOM MOUNT ASSEMBLY
FIGURE 14: LOCK KNOB INSTALLATION
13
14