4
LIST OF CONTENTS
Carefully unpack and remove the guard and its components
from the box. Ensure the box includes the following:
•
HOOD ASSEMBLY (A)
•
INNER AND OUTER BOOMS (B)
•
DUST HOSE (C)
•
EXTENSION LEG (D)
•
DIAGONAL BRACES (E)
•
BOOM MOUNT CHANNEL (F)
•
HARDWARE BAG (G)
Hardware bag contains the following:
• 6 x
1/4"-20 X 1 1/2" L BOLTS (H)
• 16 x
1/4"-20 HEX NUTS (I)
• 12 x
1/4" WASHERS (J)
• 2 x
3" HOSE CLAMPS (K)
• 8 x
1/4" SPLIT LOCK WASHERS (L)
• 2 x
1/4"-20 X 4" EYEBOLTS (M)
• 2 x
1/4"-20 X 3/4" FLAT HEAD BOLTS (N)
• 2 x
LOCK KNOBS (O)
• 2 x
ANGLE BRACKETS (P)
• 4 x
1/4"-20 X 1/2" L SCREWS (Q)
• 1 x
5/16" NUT (R)
• 1 x
5/16" X 1-1/2" HEX BOLT (S)
TOOLS FOR SET UP
• Drill with drill bits
• 5/16", 7/16" and 9/16" wrenches or socket set
• Flathead and Phillips screwdrivers
• Pencil
• 1/8" Allen key
ASSEMBLY INSTRUCTIONS
MAGNUM INDUSTRIAL MI-52100 10" OVERARM BLADE GUARD
• Before you assemble your blade guard, review the parts breakdown and keep it ready for reference.
• Start by removing the parts from the packaging.
• Carefully check the packaging for small pieces before you continue.
• Lay out the parts on a large, clear and unobstructed area and ensure that all parts are accounted for.
• If you have any questions or require further information, please contact the KMS Tools Service Department at 604.395.4134
or email [email protected]
FIGURE 4: HARDWARE BAG CONTENTS
FIGURE 3: CONTENTS
4
3
Summary of Contents for MI-52100
Page 1: ...MODEL NO MI 52100 OPERATING MANUAL...
Page 11: ...12 60 61 62...