4
UNPACKING THE BOX
MAGNUM INDUSTRIAL MI-51180 TABLE SAW
Unpacking
Remove the box and all the wood crating from around saw.
Check for shipping damage. Report any damage immediately
to your distributor and shipping agent. Do not discard any
shipping material until the table saw is assembled and running
property.
Compare the contents of your container with the parts list to
make sure everything is accounted for. If you are missing parts,
contact your sales representative.
1. Read the instruction manual thoroughly for assembly,
maintenance and safety instructions
2. Unbolt the saw from the skid
3. Carefully slide the saw from the pallet onto the floor
4. Place the table saw in an area with a sturdy, level floor;
good ventilation; and sufficient lighting. Leave enough
space around the machine for mounting extension wings
and rail assemblies; loading and off-loading stock; and
general maintenance work.
Cleaning
The factory has applied a protective coating to this saw's
exposed metal surfaces, such as the table top and extension
wings.
Remove this coating with a soft cloth moistened with kerosene.
Do not use acetone, gasoline, or lacquer thinner. Do not use
solvents on plastic parts, and do not use an abrasive pad.
WARNING
This table saw is heavy. To move the saw, use a hoist with a minimum capacity of 313 lbs (142 kg)
or the assistance of another person.
WARNING
Do not connect the saw to a power source until it has been fully assembled.
Contents
The box includes the following:
• Table saw
• Switch
• Table insert
• Two extension wings
• Router table extension
• Riving knife/ blade
guard assembly
• Mitre gauge
• Two large hooks
• Lock knob
• Handwheel
• Swivel handle
• Arbor wrench
• Push stick
• Owners manual
