Removing the Camera Head
1. Before attempting to remove the Head Unit, raise the screen on its
track to the highest vertical position and then tilt it all the way back
over the camera unit (as shown). Hold the monitor by the outside
edges of its frame as you tilt it to avoid pinching your fingers.
2. While gripping the camera FIRMLY, push in the RELEASE buttons
that hold the sides of the camera unit on the supports arms.
CAUTION: As soon as you pull forward slightly on the head unit it will
release completely from the support arms.
3. To replace the Head Unit, carefully guide it onto the support arms
and push back until it SNAPS SECURELY onto the Frame arms. Be
careful not to pinch your fingers when replacing the Head Unit.
NOTES:
Service Information (cont’d)
In the event Service is required, you may be asked to send all or part of
the unit. The camera head (camera housing and monitor) can be
removed from the Frame and Viewing Table base for portability or for
service.
10
Push IN
Summary of Contents for Journey MSJ-17
Page 1: ...MSJ 17 User s Manual ...