9
Section 3: Safety & Service
Safety Information and Maintenance
1. ALWAYS put the Viewing Table in the LOCKED position (Brake Lever
to the far right) and use the hand holds in the base of the unit when
attempting to move the machine.
2. Place unit on a sturdy table away from any heat source. DO NOT
place your unit on an unstable table, cart, or stand. Doing so may allow
the unit to fall causing serious damage to the unit or bodily injury.
3. Use of a surge protected power strip is recommended to protect
your unit from power outages, etc.
4. Avoid putting your hands and fingers into any opening (touching the
camera lens or mirror in the camera housing could reduce image
quality).
5. Dust the screen as needed with a soft, dry cloth.
6. Making sure that the unit is powered OFF, use a slightly damp cloth
to clean the unit’s surfaces. Do NOT spray chemicals or cleaning
liquids directly on the unit.
Service Information
Your Unit CONTAINS NO USER SERVICEABLE PARTS. ALL SERVICE
MUST BE DONE BY THE FACTORY OR AN AUTHORIZED SERVICE
CENTER (where available).
In the event of malfunctions or questions, please contact us:
MagniSight, Inc.
Call (800) 753-4767, or (719)578-8893
