Magnifico MR3, Use And Maintenance Manual

Page: 3 / 43

3
MAGNIFICO Use manual
•
Carefully read this manual before installing and
commissioning the oven, in that the text gives im-
portant indications regarding the safe installation,
operating and maintenance of the equipment.
•
Keep this manual in a safe and easily accessible
place for further consultation by the operators.
•
In case of transferring the oven, always attach the
manual; if necessary, a new copy must be reque-
sted from the authorised dealer or directly from
the manufacturing company.
•
Once unpacked, ensure the oven is intact and
does not show signs of damage due to transport.
A damaged appliance must never be installed and
commissioned; if in doubt, immediately contact
the after-sales technical assistance or your own
dealer.
•
The appliance has been designed to cook food in
closed premises and must only be used for this
purpose: any other different use must, therefore,
be avoided as considered improper and dange-
rous.
•
The oven must only be used by staff adequately
trained for its use. To avoid the risk of accidents
or damages to the appliance, it is also fundamen-
tal that staff regularly receive precise instructions
regarding safety.
•
The oven must not be used by persons with re-
duced physical, sensorial or mental capacities or
by persons without experience and knowledge,
unless supervised or educated regarding the ope-
rating of the appliance by a person responsible
for their safety.
•
Installation, extraordinary maintenance and re-
pair operations on the equipment must only be
carried out by professionally qualified staf.
•
Children must be supervised to assure they do not
play with the appliance or use it.
•
Pay attention to the hot parts of the external sur-
faces of the equipment during functioning that, in
working conditions, may exceed 60°C.
•
In case of fault or bad functioning, the equipment
must be deactivated; in case of repair, contact
only an after-sales technical assistance centre au-
thorised by the manufacturer and request original
spare parts.
•
Do not position other heat sources like, for exam-
ple, fryers or hotplates, near the oven.
•
Do not deposit or use flammable substances near
the equipment.
•
In case of prolonged disuse of the appliance,
both the water and electric energy supply must
be shut-off.
•
Before commissioning the equipment, ensure
to have removed all packaging, being careful to
dispose of it in compliance with the Standard in
force.
•
Amendments to the oven wiring are not admitted.
•
The non-compliance with the above warnings can
jeopardise the safety of the equipment and yours.
The gas ovens comply with the essential requirements of 90/396/EEC Gas Directive and therefore have the EC
conformity certificate issued by an approved body. They satisfy the requirements of the following gas regulations:
•
EN 203 + subsequent amendments;
•
EN 437 + subsequent amendments.
Installation must be carried out in compliance with safety requirements contained in the following regulations:
•
UNI CIG n° 7222-7723-8723 + subsequent amendments.
The appliance complies with the essential requirements of the Low Voltage Directives 2006/95/CEE. It satisfies the
requirements of the following electrical regulations:
•
EN 60335-1 + subsequent amendments;
•
EN 60335-2-42 + subsequent amendments;
•
EN 60335-2-46 + subsequent amendments;
•
EN 60335-2-36 + subsequent amendments;
•
EN 55104 / EN 55014 + subsequent amendments;
•
EN 61000 + subsequent amendments.
The appliance complies with the essential requirements of the Electromagnetic Compatibility Directive 2004/108/
CEE.
1. Installation
1.1 General and safety warnings