8
5.2
Programming of the Echotel by the 046-8108-001 Programming Module
The 046-8108-001 supports 3 separately accessible programming modes representing 3-
layers of programming complexity, depending on user choice.
PLUG-IN PROGRAMMER
Current Output
Scaling
Full
Parameter
Access
QUICKSET
Current Output Scaling (5.2.4)
Recommended as a simple and fast way to modify the scaling of the current output.
QUICKSET (5.2.5)
Recommended as a simple and fast way to set up the Echotel by 8 basic parameters
This menu driven programming mode supports the following basic settings:
•
Engineering unit for the display (Metric or US)
•
Maximum measuring distance
•
Assignment of min level to 4mA
•
Assignment of max level to 20mA
•
Error indication by the current output
•
Damping time
•
Assignment of level to energising of the relay
•
Assignment of level to de-energising of the relay
Full Parameter Access (5.2.6)
All features of the Echotel can be accessed by parameter addresses:
Example:
•
Measurement configuration
•
Outputs
•
Measurement optimalisation
•
6 pre-programmed tank shapes for volume calculation
•
32-point linearisation table
•
Open channel flow metering functions
5.2.1 The 046-8108-001 Programming Module
The plug in programming and display module is used for programming but also for display even in case of Touch-Magnetic
Programming
The Display and keys
Symbols used on the LCD
:
•
DIST
– Distance (measuring) mode
•
LEV
– Level (measuring) mode
•
VOL
– Volume (measuring) mode
•
FLOW
– Open channel (flow metering) mode
•
PROG
- Programming mode (device under programming)
•
RELAY
– Relay
•
T1
- TOT1 volume flow totaliser (resetable aggregate)
•
T2
- TOT2 volume flow totaliser (aggregate)
•
FAIL
- Measurement / device error
•
⇑⇓
- Level changing direction
•
Bargraph assigned to the current output or echo strength
Symbols used on the frame
:
•
M
– Metric system
•
US
– US calculation system
ENTER
NEXT
UP
DOWN
