Magnetrol B73 Instruction Manual And Parts List Download Page 8

IMPORTANT

SERVICE POLICY

Owners of Magnetrol products may request the return of a control; or, any part of a control for complete rebuilding or 
replacement. They will be rebuilt or replaced promptly. Magnetrol International will repair or replace the control, at no cost to
the purchaser, (or owner) 

other than transportation cost if:

a. Returned within the warranty period; and,
b. The factory inspection finds the cause of the malfunction to be defective material or workmanship.

If the trouble is the result of conditions beyond our control; or, is NOT covered by the warranty, there will be charges for labour
and the parts required to rebuild or replace the equipment.

In some cases, it may be expedient to ship replacement parts; or, in extreme cases a complete new control, to replace the orig-
inal equipment before it is returned. If this is desired, notify the factory of both the model and serial numbers of the 
control to be replaced. In such cases, credit for the materials returned, will be determined on the basis of the applicability of our
warranty.

No claims for misapplication, labour, direct or consequential damage will be allowed.

RETURNED MATERIAL PROCEDURE

So that we may efficiently process any materials that are returned, it is essential that a “Return Material Authorisation” (RMA)
form will be obtained from the factory. It is mandatory that this form will be attached to each material returned. This form is avail-
able through Magnetrol’s local representative or by contacting the factory. Please supply the following information:

1. Purchaser Name
2. Description of Material
3. Serial Number
4. Desired Action
5. Reason for Return
6. Process details

All shipments returned to the factory must be by prepaid transportation. Magnetrol will 

not accept collect shipments.

All replacements will be shipped FOB factory.

BELGIUM

Heikensstraat 6, 9240 Zele
Tel. (052) 45.11.11

Fax (052) 45.09.93

DEUTSCHLAND

Schloßstraße 76, D-51429 Bergisch Gladbach-Bensberg
Tel. (02204) 9536-0

Fax (02204) 9536-53

FRANCE

11, Rue A. Einstein, Espace Descartes, 77420 Champs-sur-Marne
adresse postale:  77436 Marne-la-Vallée Cédex 2
Tel. (0) 164.68.58.28

Fax (0) 164.68.58.27

ITALIA

Via Arese 12, I-20159 Milano
Tel. (02) 607.22.98 (R.A.)

Fax (02) 668.66.52

UNITED

Unit 1 Regent Business Centre

KINGDOM

Jubilee Road Burgess Hill West Sussex RH 15 9TL
Tel. (01444) 871313

Fax (01444) 871317

INDIA

B4/115 Safdurjung Enclave, New Delhi 110 029
Tel. 91 (11) 6186211

Fax 91 (11) 6186418

®

BULLETIN N°:

BE 46-621.1

EFFECTIVE: NOVEMBER 1996

UNDER RESERVE OF MODIFICATIONS

SUPERSEDES:

March 1991

Summary of Contents for B73









Reviews: