4.2. REPLACING THE MOTHER BOARD
A
E
E
B
1)
Use the 2 mm to remove the screws indicated in the illustration;
2)
Once they have been removed, carefully pull away the cover (E)
to remove it from it’s seating;
3)
CAREFULLY disconnect the multiple cabling connector (yellow).
To facilitate the operation use a small flat headed screwdriver to
disconnect the the connector from the female socket of the board;
4)
Remove the cover/board couple (E) and insert the new one;
5)
Repeat the step at point C to reconnect the connector;
6)
Replace the cover (E) and fix it to the structure with the two
screws that were removed.
Necessary tools:
•
2 mm Allen wrench
Z:
Temperature sensor
If the cabling is damaged (points C and E) send the Jarvis to the
manufacturer to substitute the components.
Z
!
23
4. tEChnical section
Summary of Contents for MD JARVIS
Page 1: ...MANUALE MD JARVIS 1...