Precautions required during operation/installation:
DANGER:
•
Abnormal conditions
: Continued operation when the device has been producing smoke or abnormal odours may create a fire or
electric shock hazard. Cut off power supply immediately and contact a service centre.
•
Water and foreign matter
: If foreign matter (metal, water or other fluids) enter the device, cut off power supply immediately and
contact a service centre.
•
Shocks and damage
: If the device is damaged, unplug it from the power mains and contact a service centre.
•
Disassembly
: Never attempt to dismantle or make changes to the device, as this may result in a risk of fire or electric shock.
•
Placement
: Keep device away from heat, oil fumes or vapour. Such ambient conditions might create a risk of fire and electric shock.
Keep the device away from fluids and volatile flammable materials. Non compliance may create a fire hazard.
WARNING:
•
Placement
: Do not place the device on unstable surfaces, high shelves or other unstable locations or the unit may fall,
leading to injury and/or damage.
•
Foreign bodies
: Do not insert any foreign bodies into the connectors as this may lead to device failure.
•
Maintenance
: Never use thinners, cosmetics or other volatile agents to clean the exterior of the device. Clean with a cloth
wetted with a diluted solution of water and mild detergent.
WARNING:
Recharging the device:
The device must be recharged in compliance with the manufacturer's instructions. The
Manufacturer shall not be liable for damage in the event the device is recharged using other power sources.
WARNING
•
For the maintenance of packages containing the equipment and the relocation of the equipment once installed, the
provisions of Italian Law Decrees DDLL 626 of 19/9/94 and 242 of 19/3/96 apply. Use appropriate tools to open
package.
WARNING:
•
Usage conditions:
This appliance has been designed and tested to ensure safe operation. The user is required to observe
the information and warnings provided in this manual to ensure safe operation and preserve the safety features of the
appliance.
Do not allow operation of this equipment by unqualified persons.
It is the owner's responsibility to keep warning labels and rating plates clean and legible.
This manual is subject to changes and updates.
Be sure to read the update and customisation instructions included in this manual.
The manual is divided into sections for ease of reference. Manual instructions - especially those concerning
maintenance - are intended for use by specialised technical personnel with good knowledge of mechanics, electro
mechanics or of the operation of computerised unit-based systems. The system has been designed to facilitate
operation and troubleshooting, with a wide range of display messages providing detailed indications to help locate
problems.
Please read these instructions carefully before operating the equipment.
Collect this manual and all literature supplied with the equipment in a file folder and keep it with the machine where
operators can easily access it.
Make sure installation has been performed in compliance with all applicable regulations and standards.
Read this manual carefully and learn how to use the equipment properly and safely.
Be sure to observe applicable accident prevention rules when operating and servicing the equipment.
In the event of unauthorised changes to the equipment, the manufacturer shall not be liable for any resulting damage
or incident. Please note that bypassing or removing safety devices is in violation of workplace safety rules in force in
the user's country.
