MHR Radio Controller Instruction Manual
June 2017
Page 6 of 58
1.2 PERSONS AUTHORIZED TO OPERATE RADIO CONTROLLED EQUIPMENT
Only properly trained persons designated by management should be permitted to operate radio controlled
equipment.
Radio controlled cranes, hoists, lifting devices and other material handling equipment should not be
operated by any person who cannot read or understand signs, notices and operating instructions that pertain
to the equipment.
Radio controlled equipment should not be operated by any person with insufficient eyesight or hearing or by
any person who may be suffering from a disorder or illness, is taking any medication that may cause loss of
equipment control, or is under the influence of alcohol or drugs.
1.3 SAFETY INFORMATION & RECOMMENDED TRAINING FOR OPERATORS
Anyone being trained to operate radio controlled equipment should possess as a minimum the following
knowledge and skills before using the radio controlled equipment.
The operator should:
Have knowledge of hazards pertaining to equipment operation
Have knowledge of safety rules for radio controlled equipment
Have the ability to judge distance of moving objects
Know how to properly test prior to operation
Be trained in the safe operation of the radio receiver as it pertains to the crane, hoist, lifting device
or other material handling equipment being operated
Have knowledge of the use of equipment warning lights and alarms
Have knowledge of the proper storage space for a radio control receiver when not in use
Be trained in transferring a radio control receiver to another person
Be trained how and when to report unsafe or unusual operating conditions
Test the receiver emergency stop and all warning devices prior to operation; testing should be done
on each shift, without a load
Be thoroughly trained and knowledgeable in proper and safe operation of the crane, hoist, lifting
device, or other material handling equipment that utilizes the radio control
Know how to keep the operator and other people clear of lifted loads and to avoid “pinch” points
Continuously watch and monitor status of lifted loads
Know and follow cable and hook inspection procedures
Know and follow the local lockout and tagout procedures when servicing radio controlled equipment
Know and follow all applicable operating and maintenance manuals, safety procedures, regulatory
requirements, and industry standards and codes
The operator shall not:
Lift or move more than the rated load
Operate the material handling equipment if the direction of travel or function engaged does not
agree with what is indicated on the controller
Use the crane, hoist or lifting device to lift, support or transport people
Lift or carry any loads over people
Summary of Contents for MHR
Page 1: ...MHR Radio Controller June 2017 Part Number 195 50488 0100 R7 2017 Magnetek Material Handling...
Page 21: ...MHR Radio Controller Instruction Manual June 2017 Page 20 of 58...
Page 22: ...MHR Radio Controller Instruction Manual June 2017 Page 21 of 58...
Page 23: ...MHR Radio Controller Instruction Manual June 2017 Page 22 of 58...