Magnetek MHR, Manual

Page: 50 / 59

MHR Radio Controller Instruction Manual
June 2017
Page 49 of 58
Alarm
Number
Alarm
Text
Cause of alarm Effect of alarm Recovery Action
18
S18. OUT
3 OC ERR
When the output was
activated, a current of
over 3.5A was being
drawn by the output.
The output was shut
off to prevent damage
to the hardware.
Output is shut off and will
not operate until the cause
is fixed and power to the
system is cycled
Determine what has caused the
overcurrent draw, fix the cause,
and power cycle the system
19
S19. OUT
4 OC ERR
When the output was
activated, a current of
over 3.5A was being
drawn by the output.
The output was shut
off to prevent damage
to the hardware.
Output is shut off and will
not operate until the cause
is fixed and power to the
system is cycled
Determine what has caused the
overcurrent draw, fix the cause,
and power cycle the system
20
S20. OUT
5 OC ERR
When the output was
activated, a current of
over 3.5A was being
drawn by the output.
The output was shut
off to prevent damage
to the hardware.
Output is shut off and will
not operate until the cause
is fixed and power to the
system is cycled
Determine what has caused the
overcurrent draw, fix the cause,
and power cycle the system
21
S21. OUT
6 OC ERR
When the output was
activated, a current of
over 3.5A was being
drawn by the output.
The output was shut
off to prevent damage
to the hardware.
Output is shut off and will
not operate until the cause
is fixed and power to the
system is cycled
Determine what has caused the
overcurrent draw, fix the cause,
and power cycle the system
22
S22. OUT
7 OC ERR
When the output was
activated, a current of
over 3.5A was being
drawn by the output.
The output was shut
off to prevent damage
to the hardware.
Output is shut off and will
not operate until the cause
is fixed and power to the
system is cycled
Determine what has caused the
overcurrent draw, fix the cause,
and power cycle the system
23
S23. OUT
8 OC ERR
When the output was
activated, a current of
over 3.5A was being
drawn by the output.
The output was shut
off to prevent damage
to the hardware.
Output is shut off and will
not operate until the cause
is fixed and power to the
system is cycled
Determine what has caused the
overcurrent draw, fix the cause,
and power cycle the system
24
S24. OUT
9 OC ERR
When the output was
activated, a current of
over 3.5A was being
drawn by the output.
The output was shut
off to prevent damage
to the hardware.
Output is shut off and will
not operate until the cause
is fixed and power to the
system is cycled
Determine what has caused the
overcurrent draw, fix the cause,
and power cycle the system