![background image](http://html1.mh-extra.com/html/magnetek/impulse-link-5/impulse-link-5_user-manual_3572949034.webp)
IMPULSE
®
•Link 5 Instruction Manual
April 2020
Page 34 of 47
5.2. Communications
5.2.1. Find Drives
1. Select the Communications tab, and click the
Find Drives
button, or click the
Find Drives
button on
the Welcome screen to open the Find Drives dialog.
2. Select WDS, Ethernet, or COM port checkboxes to scan for the desired drives. One or more choices
may be selected before clicking the Start button.
3. Click the Start button to begin the scan.
•
WDS and COM port scan timeout is 15 minutes unless a user clicks the Stop button.
•
Ethernet scans finish more rapidly, and automatically timeout within a few seconds.
WDS displays a moving circle containing the hexadecimal drive address of each scan attempt. Up to 31
drives may be connected to a single WDS Remote Unit (01-1F).
Communication Profiles are automatically created for each discovered drive, and they appear beneath
the Communications section.
4. Click the Stop button to end the Find Drives scan.
Figure 35: IMPULSE
•
Link 5 Professional Find Drives