IMPULSE
®
•Link 5 Instruction Manual
April 2020
Page 27 of 47
The initial
“Print” data is controlled by the Parameter view. Changing the view in the Parameter tab from "All"
to the desired view (parameter groups, modified parameters, etc.) will change the data available for printing.
Figure 23: Selecting a Specific Parameter Group
To print select parameters, shift-click the desired block of rows to print, or ctrl-click to select non-contiguous
rows. If a parameter was selected in error, simply ctrl-click that parameter to remove it from the selected
parameters (it should no longer be highlighted). Then click on the Print icon to open the Print dialog and click
the "Selected" option before printing.
Figure 24: Highlighting Select Parameters