![background image](http://html1.mh-extra.com/html/magnetek/flex-m/flex-m_manual_3580922017.webp)
Flex M Engineered Receiver Instruction Manual
May 2019
Page 17 of 50
4.1.1 RF/CPU LED OPERATION
When the Flex M system supplies power to the RF/CPU module, there is a series of LEDs that indicate
the RF/CPU module’s status.
Figure 6. GEN1 RF/CPU Module LED Placement
•
WDG/ONLINE LED:
o
Solid indicates RF communication with transmitter
o
1 Blink indicates normal operating WDG
o
2 Blinks indicates RF communication loss with transmitter
•
RF MSG LED:
o
Fast Blinks indicates radio frequency messages received (typical frequency is 4 to 10
messages per second). This confirms communication between transmitter and receiver
o
3 Steady Blinks indicates read/write error to an attached Flex M module
o
4 Steady Blinks indicates an internal radio error
•
RF SIGNAL LEDs
o
Measures the strength of the RF communication signal from the transmitter