Flex I-Chip Remote Crane Controls
August 2010
11 of 28
Pr evio u s
0
1
2
C
D
E
F
B
A
3
4
5
6
7
8
9
Nex t
Rea d
Co p y
- -
- - -
- -
-
-
TIMER
CH
FUNC
PWR
AUX
TYPE
S/ N
-
-
-
-
-
-
-
-
- -
-
-
5) Scroll down to the next screen by pressing the Next button. The production and service date
information will appear. Only the service date can be reprogrammed.
F. I-Chip programming
Press the Test Mode Select button until the LCD screen displays “I-Chip Programming 3”.
1. LCD and keypad illustrations
2. Copy
I-Chip
If you do not have an empty I-Chip on hand, you can store the original I-Chip’s information into the
programmer unit temporarily and perform a copy at later time.
Steps: First insert the original I-Chip onto the I-Chip slot, press READ button to store original I-Chip
information into the programmer unit (red light will appear on the I-Chip LED then green again), insert an
empty I-Chip onto the same I-Chip slot, press the COPY button to transfer information from the
programmer unit to the empty I-Chip (red light will appear on the I-Chip LED, then turn green again). This
will complete the programming.
