TER Ceska
Flex EX 4, Flex EX 6
Instruction manual
•
have knowledge of hazards pertaining to equipment operation
•
have knowledge of safety rules for radio controlled equipment
•
have the ability to judge distance of moving objects
•
know how to properly test prior to operation
•
be trained in the safe operation of the radio transmitter as it pertains to the crane, hoist, lifting device or other
material handling equipment being operated
•
have knowledge of the use of equipment warning lights and alarms
•
have knowledge of the proper storage space for a radio control transmitter when not in use
•
be trained in transferring a radio control transmitter to another person
•
be trained how and when to report unsafe or unusual operating conditions
•
test the transmitter emergency stop and all warning devices prior to operation; testing should be done on each shift,
without a load
•
be thoroughly trained and knowledgeable in proper and safe operation of the crane, hoist, lifting device, or other
material handling equipment that utilizes the radio control
•
know how to keep the operator and other people clear of lifted loads and to avoid „pinch“ points
•
continuously watch and monitor status of lifted loads
•
know and follow cable and hook inspection procedures
•
know and follow the local lockout and tagout procedures when servicing radio controlled equipment
•
know and follow all applicable operating and maintenance manuals, safety procedures, regulatory requirements, and
industry standards and codes
The operator shall not:
•
lift or move more than the rated load
•
operate the material handling equipment if the direction of travel or function engaged does not agree with what is
indicated on the controller
•
use the crane, hoist or lifting device to lift, support or transport people
•
lift or carry any loads over people
•
operate the crane, hoist or lifting device unless all persons, including the operator, are and remain clear of the
supported load and any potential pinch points
•
operate a crane, hoist or lifting device when the device is not centered over the load
•
operate a crane, hoist or lifting device if the chain or wire rope is not seated properly in the sprockets, drum or
sheave
•
operate any damaged or malfunctioning crane, hoist, lifting device or other material handling equipment
•
change any settings or controls without authorization and proper training
•
remove or obscure any warning or safety labels or tags
•
leave any load unattended while lifted
•
leave power on the radio controlled equipment when the equipment is not in operation
•
operate any material handling equipment using a damaged controller because the unit may be unsafe
•
operate manual motions with other than manual power
•
operate radio controlled equipment when low battery indicator is on
WARNING
Page 5 of 27
December 2015
