![background image](http://html1.mh-extra.com/html/magnetek/flex-8ex-a-b/flex-8ex-a-b_instruction-manual_693936039.webp)
Flex 8EX A/B System Instruction Manual
June 2010
37 of 42
7. Operating Procedure
A. TRANSMITTER
OPERATION
1. General
Operating
Procedure
a.
Reset the red emergency stop button located on the top left hand side of the transmitter
handset by rotating it either clockwise or counter clockwise. The red button will pop up.
b.
Turn on the transmitter power by inserting the black-colored key into the power key slot
(located on the top right hand side of the transmitter handset) and rotate it clockwise to
the “On” position.
c.
After turning on the transmitter power, check the Status LED on the transmitter handset for
any sign of system irregularities (refer to “Status Light Indicators & Warnings” on page 39).
If the system is normal, the Status LED will light up green for two (2) seconds.
d.
If there are no signs of any system irregularities, then rotate the power key further
clockwise to “Start” position for up to 2 seconds - this will activate the receiver MAIN
(depends on JP3 setting on page 30). Thereafter, the same “Start” position will become
an auxiliary function with momentary contact (refer to page 26).