LY72 Initial Setup Manual
10/14
RS232C function setting
6
．
When the advanced settings are complete, switch to the normal display.
Press key.
This completes the initial settings.
Print mode
Computer mode
RS232C output data mode selection
Select the output data format when selecting the computer mode
Select with key to add or not add header
Select whether or not to insert line breaks for each axis with the key
Invalid when print
mode is selected
When ABC label is selected
When XYZ label is selected
Select default settings for output data
(Output data can be changed by RS232C command)
current value
maximum value
minimum value peak to peak value
Set automatic data output at fixed time intervals (unit: ms)
Select the transfer rate of RS232C (unit: bps)
Select RS232C parity check
None
Odd
Even
Select stop bit of RS232C
1 stop bit
2 stop bit
Select RS232C data length
8 bit
7 bit
Step 5
How to set up Advanced Settings (3/3)
A
d
va
n
ce
d
S
e
tt
in
gs
MODE
Output Data mode
FORM
Data output format
r DATA
Output data selection
TIMER
bPS
transfer speed
Parity
STOP
Stop bit
LENGTH
Data length
Invalid when XYZ
label is selected
Invalid when XYZ
label is selected
default
default
default
default
default
default
default
default
default
