(E)
3
When providing an IP67 degree of protection
Use the supplied wrench (accessory) and mount the hose elbow (accessory).
Procedure
1.
Remove the cap.
Cap
Supplied wrench
Fig. 4 Removing the cap
2. Attach the hose elbow.
Tighten the M5 screw by hand until the gasket contacts the wall, and then use the
supplied wrench to tighten an additional approx. 90°.
Supplied
wrench
Hose elbow
Tighten in the
parallel position.
Hose elbow
M5 screw
Gasket
Hose elbow
Fig. 5 Attaching the hose elbow
3. Attach
the
φ
4 mm tube.
φ
4
mm
tube
Fi
x
ing ring
Fi
x
ing ring
Fig. 6 Attaching the
φ
4 mm tube
Note
Extend the tube attached to the hose elbow so that the notched part on the opposite end
from the hose elbow is not exposed to water or oil.
Summary of Contents for DK812SAFR
